More share buttons
Share on Pinterest
Share with your friends










Submit
Visuals

Rethinking Title Slides

green traffic light - start your presentation
Share on Pinterest
Share with your friends










Submit

The title slide is prime presentation real estate. You can either choose to invest in it or miss a great opportunity to grab you audience’s attention from the start. Here John Zimmer makes the case for rethinking the potential of the title slide and gives ideas on how to make the most impact when opening your next presentation.

The title slide

The gateway to your presentation.

The sign that tells your audience where they’re going and who’s going to take them on the journey.

Titles slides often contain such details as the date of the presentation, the name and location of the event, the logo of the speaker’s company, contact details and more. In fact, it is not unusual to see a title slide like the example below or some variation of it.

 

example of title slide in presentation

 

 

Now, there is nothing inherently wrong, per se, in having a title slide like this. It conveys important information about what is to come. But it is bland and all too common.

What’s worse, what often happens, is that this slide is projected on the screen before the speaker takes the stage. The speaker is then introduced and proceeds to say something along the lines of the following:

“Good morning / afternoon. My name is [name on the slide]. I am the [speaker’s title on the slide] at [company whose logo is on the slide]. I am very happy to be at [name of the event on the slide]. Today I am going to talk to you about [presentation title on the slide and perhaps some variation of the subtitle].”

In other words, the speaker starts by telling the audience things that they already know because they have already read the title slide. Not a great way to begin. In fact, by beginning this way, many speakers waste one of the most important parts of their presentations, the opening.

Psychologists talk about the learning principles of primacy and recency. People tend to remember the first thing they hear and the last thing. So the openings (and closings) of your presentation are important. You don’t want to waste them.

This post is not about designing a good title slide – there’s plenty of information elsewhere about design principles; rather, it’s about thinking differently about title slides and how to use them.

I’d like to share three ideas for you to consider with regard to title slides. These ideas might seem unconventional – and to the extent that most presenters don’t follow them, they are – but whenever I have seen them used, the results have always been positive.

 

Idea No. 1 – You don’t always need a title slide

There is no rule that you need a title slide for every presentation that you make. This is especially so if there is an agenda for the event that clearly states your name and the subject of your talk.

Instead, make your first slide black and have it showing before you are introduced. The audience won’t even know it’s a slide: they’ll just see a black screen.

When you are introduced, walk on stage and begin speaking while the screen is black. The audience will be 100% focused on you because there is nothing on the screen to distract them. At the appropriate point, transition to your first substantive slide and continue the talk.

When participants in my corporate trainings try this approach, the feedback from their peers is overwhelmingly positive. The audience feels more connected with the speaker and a solid foundation has been laid for the rest of the talk.

Notwithstanding the above, if you distribute copies of your slides after the presentation, I recommend that you do include a title slide so that people have the name of your presentation, your personal details, the date of the presentation, etc. There is no rule that says that the copies you distribute have to be exactly the same as what you showed on the screen.

 

Idea No. 2 – You can start talking and transition into the title slide

This idea is a variation on Idea No. 1.

As above, you begin your talk with a black slide. You open, for example, by telling an interesting fact or making a bold statement or telling a story. Of course, whatever you say, it should be related to your talk.

Once you have completed your opening comments and have grabbed your audience’s attention, you click into the title slide and tell them where you are going to take them.

This type of opening reminds me of the opening to a James Bond movie. If you have never seen a Bond movie, they usually open with a riveting scene involving high drama: a high speed car chase; skiing down a mountain; jumping out of a plane; or some other adrenalin-pumping activity. Once the scene is over, things calm down and we find out what the plotline of the film will be.

The good news is that you do not have to be James Bond on stage. (Though if you are, I for one will be pleased to buy a ticket.) But you can use the technique of a powerful opening and transition into the title slide to achieve a similar effect.

 

Idea No. 3 – Start with a substantive slide and click into the title slide

This idea is a variation on Idea No. 2. However, instead of a black slide, you begin your talk with a substantive slide on the screen and then transition to the title slide.

A few months ago, I was working with a young start-up company that has created an incredible device to help people who have been injured regain the use of their legs. Their device has been featured on CNN as part of an exposé examining the incredible technological breakthroughs that are being made in this field. I was helping them with their pitch.

They began with the usual, title slide and explained who they were and what they did. They then transitioned to their second slide, which was an amazing full screen image, and they told the amazing story behind it.

During the feedback discussion, I said, “Let’s try something. Let’s start with the image and put the title slide second.” I then reversed the two slides in the PowerPoint. “OK,” I told them, “go right into the story and then click to the title slide and tell me who you are and what you do.”

So they did, and they were almost jumping up and down with excitement over how much better it was. Now, they began with a compelling story that hooked you from the outset. After their story was completed, they clicked into the title slide and said, “We are [Company X] and our passion is to help people like [the person in the above-mentioned story].

And as I told them, I had not done much; just swapped two slides. But little changes can make a big impact.

So there you have it. Three ideas to consider when it comes to title slides; three ideas that can give the opening of your next presentation a shot in the arm.

 

If you liked this, you might also like:

Ideas for ending your presentation: Rethinking Final Slides

John Zimmer
John Zimmer is an international speaker, trainer and lawyer. He has worked at a major Canadian law firm, the United Nations, the World Health Organization and is now a full-time speaker. A seven-time European Champion of speech contests, John writes an internationally recognized blog about public speaking, Manner of Speaking. He is also the co-creator of Rhetoric – The Public Speaking Game™.
John Zimmer
8 Comments

8 Comments

  1. Harley G King

    30th August 2017 at 9:32 pm

    I love the flipping of the slides idea, John. Brilliant. I would also suggest not introducing yourself. Have someone else introduce you. Also, don’t reintroduce yourself as I have seen many speakers do.

    • John Zimmer

      1st September 2017 at 8:54 am

      Hi Harley,

      Thanks for the comment. I agree that it is always best to have someone introduce you whenever possible. And, in such cases, I tell people to write out a short introduction for them so that they say the most relevant things for that particular audience. When there is no one to introduce you, you should introduce yourself briefly. But it does not have to be the first thing you say.

      Cheers!

      John

  2. Rashid N Kapadia

    30th August 2017 at 9:39 pm

    May I offer an alternate thought:
    1st slide of deck = title slide. 2nd slide = black slide. 3rd slide = speakers opening slide/beginning of content. Last slide (closing / thank you) to contain main elements of 1st slide thereby acknowledging event and organizers.

    Have the title slide displayed during the pre-talk period. (unless organizers have a auto slide deck playing. This is common)
    As soon as the introducer / organizer rises to introduce the speaker- switch to 2nd / black slide. The screen should be black before the introducer reaches the lectern. All attention is transferred to introducer.
    After speaker takes stage, grounds (connecting to yourself) and connects (receives audience attention) with audience (should take minimum 10 seconds), then switch to slide 3 and begin delivering content.
    Last slide to be left on for post-speech period. Unless organizer want to go to different auto play slide deck
    Just some thoughts.
    GOOD LUCK!

    • John Zimmer

      2nd September 2017 at 9:25 am

      Thanks for the comment, Rashid. Your approach would work nicely. In such a case, if I were the speaker, I would be the one controlling the image on the screen at all times. It would ensure that I kept control over the slides and would avoid having a complicated procedure with other people. And, if there is a detailed programme that the audience members already have, you could dispense with the title slide or even go with a simple transition slide: “Next speaker: ***”.

      One other point, given that you touched on it. For a final slide, I tell people never to write “Thank You!” For me it is a waste of premium space on an important slide. If you want to thank your audience, look at them and thank them sincerely. From the heart. Not from some slide that you typed out three days earlier.

      Cheers!

  3. Craig Hadden (@RemotePoss)

    31st August 2017 at 2:12 am

    I really like #3, and it sounds like your client loved it!

    It ties in with a technique I call “start strong”, meaning to open with a scenario (“Imagine if…”), a startling statistic, or a story. (Grab people at the gut level, and they’ll listen for sure!)

    For #1, here’s a tip for people who struggle a bit with PPT: An easy way to skip the title slide during the slideshow (yet still have it there for when you share your slides) is to choose Hide Slide from the Slide Show tab.

    Thanks for thinking outside the box, John, and I hope to see more presenters following suit!

    • John Zimmer

      2nd September 2017 at 9:29 am

      Thanks for the comment, Craig and thanks for sharing your post. You only get one shot at making a good first impression, so starting strong is fundamental. Those are good tips on your post. Thanks also for the handy reminder about hiding slides. I fully agree that if you distribute your slides, there should be a title slide with all of the relevant information (speaker, date, title, event, company logo, etc.)

      Cheers!

      John

  4. Linda Kundell

    7th November 2017 at 6:29 pm

    Food for thought.

    • John Zimmer

      8th November 2017 at 10:09 am

      Indeed, Linda. So often what we think of as a “rule” of public speaking is nothing more than a bad practice that has been repeated over and over again. This is not to say that title slides are inherently bad; rather, if we step back and think creatively, we see that there are different ways to use them.

      Cheers!

Leave a Reply

Your email address will not be published. Required fields are marked *

To Top